home made penis pump
I am not a big fan of penis pumps, but I have to admit that I do have an interest in them. I just finished a fairly lengthy and tedious build of a penis pump for my girlfriend. It has been a long and arduous process, but I am glad it was worth it, because it is something that I will remember for a very long time.
The pump is a simple, basic piece of plumbing. It uses a standard 1.5 gallon plastic bottle held together by a plastic body, a flexible tube, a ball valve, and one of those tiny ‘pump clips’ that you can buy at the hardware store. The pump measures about 4 inches long. It is equipped with a simple on/off switch, and a couple of quick-release attachments.
This is the smallest penis pump I have ever seen. It has a light bulb and an LED, and it uses about 1/8 of the power it would use for a typical penis pump. This is a good thing because you only use about 1/4 of the water for the erections, which is also good. It takes about 20 minutes to fully fill the bottle. You can get one for around $15 at most plumbing shops.
The pump is actually fairly simple to make, and the instructions are easy to follow. The light bulb is actually a small LED, which makes it easier to read because you don’t have to wear glasses. The pump also uses about 5.5 gallons of water, which is surprisingly consistent for a large penis pump. This is about the most water you could possibly use for a penis pump.
It’s about as close to a pump as you can get without actually using a vacuum cleaner. Instead you pour the water into the pump and the pump uses that to fill the bottle. There are also no air bubbles getting into the bottle, which is a small but important aspect when using a pump.
Its a little disconcerting that the pump is made by a man in Mexico, but it is nonetheless a great pump. You can even buy it in a bunch of different sizes and designs. I also like the fact that the pump works with just about anything that has a vacuum in it, including a hot water bottle.
A small but important aspect is that when you use this pump you are essentially creating a positive feedback loop where the pump keeps filling the bottle, but the water it gets into the bottle can actually do something good. This is because the water is a way of getting the pump to produce more water. This process is called recycling, and it is not uncommon in the home appliance world for a pump to be used in this way.
This pump, which is a basic hot water bottle, does not come with a hose clamp. We put one of these on so that we can pump our pump while standing up. The main benefit of this pump is that it keeps the pump bottle clean, reducing the chance of breakage. It is also a very simple mechanism, requiring minimal power and little maintenance. The pump itself is a good design, but it does require an extra step to ensure that it is being correctly filled.
We are now taking out a larger pump, which, again, is a basic hot water bottle. This one has a hose clamp, which allows us to pump while standing up. The main benefit of this pump is that it allows us to pump our pump while standing up. The pump itself is a good design, but it does require an extra step to ensure that it is being correctly filled.
What we’re really doing is filling our penis to the brim with water. Not only is this a cute, harmless exercise, but it can help to strengthen our muscles. Pumping the penis helps a lot with erections for both men and women. And let’s be real, most men know how to do it, but most women are not confident enough to be able to pump on their own.
--0 Comment--